Steel Coil Order Feasibility Checker

Check steel coil order specifications for GI, GL, PPGI, PPGL, Zn-Al-Mg and tinplate. Review dimensions and order requirements with Hengze Steel.

Home » Support » Steel Coil Order Checker

HENGZE STEEL · TECHNICAL TOOL

Steel Coil Order Feasibility Checker

Check your target specifications against published reference ranges and prepare a structured inquiry for our technical team.

GIGLPPGIPPGLZn-Al-MgETP / SPTE

Product & Standard

Select the product and provide the specification basis, if known.

Product category * Governing standard Steel grade / temper Application

Coil Dimensions

Enter the required dimensions. Thickness and width are required for the preliminary check.

Thickness (mm) * Width (mm) * Coil ID — inner diameter (mm) Coil OD — outer diameter (mm) Target net coil weight (metric tons) Total order quantity (metric tons)

Use finished-product thickness if that is what your purchase specification defines. If a standard defines substrate thickness differently, tell us in the notes.

Coating & Surface Requirements

Only complete the fields relevant to your product. Unknown values can be confirmed by our team.

Metallic coating mass (g/m²)Enter a grade or value if specified. Paint system / finish Top paint thickness (μm) Back paint thickness (μm) Color / surface / tin coating designation Required tolerance / special requirement

Order Details

These details help us assess the specification as a real order rather than dimensions alone.

Destination country / port Target delivery date (optional) Additional notes

Steel Coil Order Feasibility Checker